1. The exact measured energy efficient ratio (EER) of the products shall meet the requirements defined by the latest version of the National Standards Bureau or the National Energy Commission.
2. The product value of dB depends on the CNS 3615 newest versions and method should follow the standard:

   Capacity of the Household-use air conditioner (kW)	Indoor (dB)	Outdoor (dB)
   Under 2.3kW	less or equal 50	less or equal 53
   Between 2.3kW to 4.1kW	less or equal 53	less or equal 57
   Over 4.1kW	less or equal 58	less or equal 62

    

3. Plastic components of the product weighting 25 g or greater shall meet the following requirements:
   • shall not contain cadmium, lead, chromium (+6) or mercury;
   • shall not contain the following flame retardants:
     • polybrominated biphenyls, (PBB);
     • polybrominated diphenylethers, (PBDE): monobrominated diphenylether, dibrominated diphenylether, tribrominated diphenylether, tetrabrominated diphenylether, pentabrominated diphenylether, hexabrominated diphenylether, heptabrominated diphenylether, octabrominated diphenylether, nanobrominated diphenylether, decabrominated diphenylether.
     • long-chained chloroparaffins with 10-13 carbon atoms per The product and its manufacturing process shall not contain or use substances controlled by the Montreal Protocol.
4. The painting material must not include the mercury, mercury compounds or mixed with dyes stuff containing lead, cadmium, chromium (+6) and their oxides. The products shall not have any organic solvent residue.
5. The name and address of the Green Mark user must be clearly printed on the product or on the packaging material. For non-manufacturing Logo users, the manufacturer's name and address shall also be shown.
6. The product or the packaging material shall bear a label reading "saving energy, low noise".

Remark:

1. Corrugated carton used for packaging is recommended to be made from recycled pulp with at least 80% recycled paper. The packaging material shall not use CFC foaming agent as filler.
2. The energy efficient ratio (EER) shall be indicated in the catalogue.
3. The noise level shall be indicated in the user's manual.
4. The determination of polybrominated biphenyls and polybrominated diphenylethers flame retardants should be based on international, national or specific industry standards, such as the US EPA 3540C/8081A/8082A/8270D, and the detection limits should be no greater than 5 ppm.
5. The determination of long-chained chloroparaffins with 10-13 carbon atoms per molecule should be based, in the order of preference, on international, national or specific industry standards, such as the US EPA 8270D/3540C/GC-MSD, and the detection limits should be no greater than 5 ppm.
6. The determination of cadmium, lead, chromium (+6) and mercury, should be based, in the order of preference, on international, national or specific industry standards, such asUS EPA 3050B/3051A/3052/3060A, and the detection limits should be no greater than 2 ppm.